Back
Exit to main menu
Settings
General
General device settings
Network
Basic settings of the network interface
Alarm limits
Configuration of the alarm limits
Measuring
Units, display settings, etc.
SOAP protocol
Setup SOAP protocol for database system
Email
Alarm emails configuration
Protocols
Syslog and ModbusTCP protocol settings
SNMP
SNMPv1 protocol and SNMP Traps
Time
Synchronization with NTP server
WWW and Security
Web server and Security configuration
MinMax memory
Timestamps, clear memory
Maintenance
Factory defaults, info, etc.
Alarm limits
Configuration of the alarm limits. The safe range is between high and low limit. Alarm condition occurs while measured value is out of the safe range for selected time delay. Alarm is cleared if measured value returns to safe range with hysteresis.
Temperature limits
Current value: 24.6 °C
High limit [°C]
Low limit [°C]
Hysteresis [°C]
Time delay [sec]
Relative humidity limits
Current value: 82.6%RH
High limit [%RH]
Low limit [%RH]
Hysteresis [%RH]
Time delay [sec]
Dew point limits
Current value: 21.4°C
High limit [°C]
Low limit [°C]
Hysteresis [°C]
Time delay [sec]
n/a limits
Current value: Error 2
High limit []
Low limit []
Hysteresis []
Time delay [sec]